The Core Trainingsboard is the ultimate training tool; a full range of holds from nice to nasty, skillfully created and evolved by climbers for climbers. Screw it on your woody, up in your attic or anywhere else where you might feel the urge to toughen up those fingers.
With Linebreaker App Extended Activation Code for free!
Easy and cheap Trainingsboard for beginners. It packs a powerful punch for its size and is a great training tool for applications with limited space. It's a middle weight contender that will keep your training session on the up and up!
Inexpensive trainingsboard with very ergonomic Slopern, brackets and holes!
In the U.S. Climbing Climbing Magazine selected as "Editors Choice".
With Linebreaker App Extended Activation Code for free!
Colt Screw Carabiner Ideal for securing and setting up anchorages. Singing Rock's smallest, super-lightweight carabiner. Ideal for securing and setting up anchorages. Black Colt Screw Carabiner Ideal for...
Versatile HMS locking biner designed for belaying, rappelling and anchor building hot-forged I-beam construction makes the carabiner extremely strong, stiff and light large rope bearing area for better rope glide and reduced wear on the carabiner pear-shaped basket facilitates belaying with the Münter hitch or other belay devices angled snag free Keylock... Versatile HMS locking biner designed...
Small and lightweight force gauge For maximum force measurement and benchmarking Measures forces up to 200 kg Battery rechargeable via USB-C Evaluation using a free app for Android and IOS Can be attached between the Linebreaker CUBE and the load for measuring, for example Small and lightweight force gauge For...
Spax-Screws galvanized Torx 5 x 80 threaded portion Suitable, among other things, as anti-twist device for large campus slopers: Size XS (90x80 mm) Size M (130x70 mm) Size L (145x77,5 mm) Spax-Screws galvanized Torx 5 x 80...
Spax-Screws galvanized Torx 5 x 100 threaded portion Suitable, among other things, as anti-twist device for large campus slopers: Size M (120x100 mm) Size L (150x100 mm) Spax-Screws galvanized Torx 5 x 100...
9 jugs climbing holds for four fingers or the hole hand typically for 0° to 90° walls for easy routes/bouldering or steep overhangs polyurethan fastening with M10 cylinder head screws and spax screws (not included!) 9 pieces M10 x 50 mm 9 pieces spax 5 x 35 mm 9 jugs climbing holds for four...
Two XL holds made from the best beech wood. Positive enough for 60º walls. With carefully considered ergonomic design. Beech wood (only for indoor use) Jugs Symmetric design Application range: 0-60° Weight about 600g (two holds) Fastening (two holds): 2 pc. M10x60 cylinder head screw 2 piece 5x40 spax screw Included in delivery: Two holds without screws Two XL holds made from the best beech...
Six small wooden holds from Euroholds Beech wood 3 symmetrical pairs Versatile pinches For 0-30° walls Weight 300g Fastening with Spax screws 5 x 35 mm Scope of delivery: Six holds without screws Six small wooden holds from...
High-quality pull-up bar Many grip variations possible For wall mounting Dimensions: 1210 mm width 470 mm height 615 mm depth High-quality pull-up bar Many grip...
Cast iron weight plates With 31mm hole suitable for all standard bars with 30mm diameter Weight as selected: 0.5 kg 1.25 kg 2.5 kg 5 kg 10 kg Kg indication on each plate Suitable for the Linebreaker BOLT Scope of delivery: One weight plate of your choice Cast iron weight plates With 31mm...
Über 80 Übungen für Schulter, Core, Hüfte und Sprunggelenk Softcover, 208 Seiten Erschienen: Juni 2017 Gewicht: 644 g ISBN: 978-3-7423-0104-8 Über 80 Übungen für Schulter, Core,...
Zinc + 7 trace elements Testosterone management Skin & hair - immune system Contents: 66g Pharmacy PZN: 4172324 Zinc + 7 trace elements Testosterone...
Traininsrings made of extremely stable birch plywood. Ideally suited for athletics and stabilization training! Scope of supply: 1 pair of rings incl straps. Outerdiameter: 23,6cm Innerdiamerter: 17cm Ring Diameter(circumference): 10,5cm Ring Width: 3,2cm Strap Size: 4cm x 5m Max. Load: 400kg per Ring Traininsrings made of extremely...
The target10a Linebreaker BASE is the Trainingsboard for beginners An ideal partner for beginners in climbing or boulder training on the fingerboard! Rounded holds offers a skin friendly training on pockets, bars, slopers and two jugs! With App for Android and IOS The target10a Linebreaker BASE is the...
B-Stock: Full functional, but small damages on surface. The Linebreaker PRO is the top training board for extreme climbers! The hold selection and hold depths are intentionally designed heavy. All edges are perfectly rounded for a skin- and joint-gentle training. The step design of the board prevents the unloaded fingers from bumping or resting on the board. B-Stock: Full functional, but small...
Training tool to increase the grip strength for pinches for climbers, boulderers and ninja warriors! Three different sizes available: 90mm 80mm 70mm Three different combinations of pinches are possible for each size! Mainly for fastening weights! Prices apply per size and piece and with cord - WITHOUT CARABINERS AND WEIGHTS! Training tool to increase the grip...
The Linebreaker CRIMP is a trainingsboard with 9 bars of different sizes from 8mm to 40mm! There is a 55mm handle on the top! Due to the finely scaled bar depths, personal limits can be pushed further and further! The bars can be comfortably gripped with 4 or 5 fingers (CRIMP) - however, also only 2 or 3 fingers can be used. With Linebreaker App Extended... The Linebreaker CRIMP is a...
Linebreaker CUBE, MONO+ and BOLT 4 holds in 3 different inclinations at least 7 different combinations of pinches for hanging or loading with weight With the Linebreaker BOLT for 30mm weight plates! Scope of delivery: Linebreaker CUBE + Linebreaker MONO+ + Linebreaker BOLT with a carabiner and nylon loop Linebreaker CUBE, MONO+ and BOLT 4...
B-Stock: Full functional, but small damages on surface. The Linebreaker RAIL is a narrow and elegant Trainingsboard from target10a. Rounded holds offer skin-gentle strength training on finger holes, bars, slopers and jugs! Dimensions: 58cm x 4.5cm x 7cm Weight: approx.0.8 kg With App for Android and IOS! B-Stock: Full functional, but small...
Set of 2 wooden campus grips from target10a "Grip" version of the popular target10a campus rungs Perfect for system walls, home training walls or boulder walls As a supplement to a trainingsboard Skin-friendly curves and surface All holds can be used on both sides Available in sizes XS, S, M, L and XL Pre-drilled for Spax screws WITHOUT screws Length: 13cm Set of 2 wooden campus grips from...
Here the damage is greater than with the B-Stock: Either a handle is sanded or slightly damaged by a branch But it can also simply be a larger crack on the back wall or front side (the board still holds!) Or the entire surface is very rough and barrel-like! In the comments on the order, indicate which of the three restrictions you would like best! Here the damage is greater than with...
B-Stock: Full functional, but small damages on surface such as cracks, scratches or repairs with wood kit. The damage is only visual - there are no restrictions on training! B-Stock: Full functional, but small...
The Linebreaker RUCKETS are campus rungs with each two 3-finger, 2-finger and 1-finger holes. They are made of yellow poplar and are optimally rounded and beveled. The length is 54cm and there are three different depths available: S (19mm), M (27mm) or L (35mm) Fixing material not included! Price is per piece! Quantity discount of 10% when purchasing 6... The Linebreaker RUCKETS are campus...
Rotating pull-up bar made of beechwood with 65mm diameter. For heavy pull-ups or for funny bouldering problems. Diameter: 65mm Length Wood: 64cm Weight: 2Kg Material: Beech Wood without ball bearing Rotating pull-up bar made of...
Cast iron weight plates With 31mm hole suitable for all standard bars with 30mm diameter Weight as selected: 0.5 kg 1.25 kg 2.5 kg 5 kg 10 kg Kg indication on each plate Suitable for the Linebreaker BOLT Scope of delivery: One weight plate of your choice Cast iron weight plates With 31mm...
The Linebreaker BOLT is a weight loading pin to load with conventional 30mm weight plates. A wide variety of handles can be attached with a carabiner to lift the freely adjustable weight. Dimensions: 36cm high and 2.5cm diameter Weight (with carabiner and nylon strap): 0,8 Kg Scope of delivery: 1 bolt with carabiner and nylon strap Without weight plates! The Linebreaker BOLT is a weight...
The Linebreaker "AIR"BASE: For those who do not have the possibility to attach their hangboard to a solid wall: The Linebreaker "AIR" ASE can simply be hung with a carabiner on a banister, beam, branch or the like!With app for Android and IOS! With Linebreaker App Extended Activation Code for free! The Linebreaker "AIR"BASE: For those...
Our Linebreaker BANDS are robust resistances bands for high performance requirements. Various training opportunities, such as to facilitate exercises, but also to make them more difficult! Six different strengths Length: 2m 100% natural latex! Our Linebreaker BANDS are robust...
Drive-In Nuts M10 for mounting climbing holds. Galvanized With 4 strike tips Height: 13 mm Drive-In Nuts M10x13 d[m]: 10,0 h[mm]: 13 s[mm]: 25 from 0,07€ per piece (see discounts) Drive-In Nuts M10 for mounting...
The campusrungs of target10a are perfectly rounded and beveled. Beechwood was used as material. The rungs of size M are 27mm wide and 45mm high. The length can be ordered variable. The standard length is 40cm. As mounting hardware 5 x 50 mm screws are suitable Mounting hardware is not included! Price is per piece Discount of 10% on purchase of 6 bars! The campusrungs of target10a are...
The target10a Linebreaker BASE is the Trainingsboard for beginners An ideal partner for beginners in climbing or boulder training on the fingerboard! Rounded holds offers a skin friendly training on pockets, bars, slopers and two jugs! With App for Android and IOS The target10a Linebreaker BASE is the...
Hemispheres of wood for Campusboard or Systemwall Training. Material: Lime Tree Diameter: 130mm Height: 70mm Drilling Selection: For Spax Countersunk Head Screws 8x100m For Cylinder Head Screw M10x90mm Price per piece! Discount of 10% on purchase of 8 items! Mounting hardware not included! Hemispheres of wood for Campusboard...
Spax-Screws galvanized Torx 5 x 35 threaded portion for campus rungs Suitable for campus rungs or climbing holds Spax-Screws galvanized Torx 5 x 35...
ABC Spax galvanized Torx 4 x 50 threaded portion for securing campus bars Suitable for the following campus bars: Campusleisten Größe M ABC Spax galvanized Torx 4 x 50...
ABC Spax galvanized Torx 4,5 x 60 threaded portion for securing campus bars Suitable for the following campus bars: Campusleisten Größe L ABC Spax galvanized Torx 4,5 x 60...
Hemispheres of wood for the Campusboard- or Systemwalltraining. Material: Lime Wood Diameter: 145mm Height: 77,5mm Drilling Selection: For Spax Countersunk Head Screws 8 x 100mm For Cylinder Head Screw M10 x 90mm Price per piece. Discount of 10% on purchase of 8 items! Mounting hardware not included! Hemispheres of wood for the...
On orders over 50€ no shipping costs when delivery is within Germany!
Take a look at our Trainingsmagacine with tons of information on climbingtraining.
Here we have remaning stock ware or B-Ware with small flaws for reduced price!