Best sellers

Showing 61-72 of 159 item(s)

Metolius Wood Grips Deluxe Trainingsboard

-€40.10

Delivery Time: 1-2 Days

Metolius

Metolius Wood Grips Deluxe II Trainingsboard

Metolius

mttr000050000

€99.90 €140.00

Trainingsboard made of fine wood with many grips. Offers big pockets, slopers and various holes for climbing training. As a result of the appearance it integrates like a kind of furniture in the apartment! Measurements: 61x22 cm / 3,9 Kg With Linebreaker App Extended Activation Code for free!

Wooden Deep 2-Fingerpocket - Klettergriff aus Holz

Wooden Deep 2-Fingerpocket - Klettergriff aus Holz 2

Delivery Time: 1-2 Days

Wooden Climbingholds

Wooden Deep 2-Fingerpocket - Wood Climbing Hold

Euroholds

euho-WO-014

€12.90

Deep 2-fingerpocket - Extremely comfortable and can also be used on very steep climbing walls! Beech wood (only for indoor use) Deep 2 finger hole Application range: 0-90° Dimensions: 20x10x4 cm Weight about 100g Fastening: 3 pieces 5x40 spax screws Included in delivery: A hold without screws

Training Climbing Holds

20 Crimps 0-45° - Climbing Holds (Hillocks)

Euroholds

euho00S170000

€59.90

20 climbing holds with different crimps (bars) typically for 0° to 45° walls made of polyurethane fastening with M10 cylinder head screws and spax screws (not included!) 20 pieces M10 x 50mm 20 pieces spax 5 x 35 mm

WOODEN PHANTOM L2 - XL Henkel -Klettergriff aus Holz

WOODEN PHANTOM L2 - XL Henkel -Klettergriff aus Holz 2

Out-of-Stock

Wooden Climbingholds

WOODEN PHANTOM L1 - Two Symmetric Wood Climbing Holds XL Jugs

Euroholds

euho-WO-045

€39.90

Two XL holds made from the best beech wood. Positive enough for 70º walls. With carefully considered ergonomic design. Beech wood (only for indoor use) Jugs Symmetric design Application range: 0-90° Weight about 600g (two holds) Fastening (two holds): 2 pc. M10x60 cylinder head screw 2 piece 5x40 spax screw Included in delivery: Two holds without screws

View

Delivery Time: 1-2 Days

Wooden Climbingholds

target10a Wood Pocket - 3-Finger 30mm

target10a

tawh3-FINGER30

€4.90

Wooden hold from target10a 3-Fingerpocket 30mm deep especially for climbing and bouldering training extremely skin-friendly design and surface! for 10° to 35° walls made of yellow poplar produced 100% in Germany (Franconia) suitable screws: M10 x 40mm and (optional anti-twist device) Spax 5 x 35mm Delivery Scope: 1 hold without Screw

Jugs

10 Jugs for 0-45° - climbing holds (Candies)

Euroholds

euhoCANDY0000

€44.90

10 jugs climbing holds for four fingers or the hole hand typically for 0° to 45° walls polyurethan fastening with M10 cylinder head screws and spax screws (not included!) 10 pieces M10 x 40 mm 10 pieces spax 5 x 35 mm

Antworks Lukis Darling - Rotierende Klimmzugstange

Antworks Lukis Darling - Rotierende Klimmzugstange 2

Trainingsboards

Antworks Lukis Darling - Rotating Pull Up Bar

Antworks

antw000090001

€109.00

High quality, self-rotating pull up bar by Antworks. For special training of the grip strength 60mm diameter Handmade from ash Dimensions: 94 x 9,0 x 6,0cm Weight: 2,5Kg

Jugs

15 Jugs for 0-45° - climbing holds (Worns)

Euroholds

euho0013M0000

€59.90

15 jugs climbing holds for four fingers or the hole hand typically for 0° to 45° walls polyurethan fastening with M10 cylinder head screws and spax screws (not included!) 15 pieces M10 x 40 mm 38 pieces spax 5 x 35 mm

Weight Training

Antworks BASE A (for Paralletes)

Antworks

antwBASEA0001

€69.00

With these special wall mounts, it is possible to use your Antworks Parallettes as a pull-up bar in a few simple steps, whether on a wall, roof pitch or ceiling. The hanging is the simplest. The Parallettes are simply pushed sideways into the holders and secured against slipping with the help of the two snapper. Finished.

Delivery Time: 1-2 Days

Wooden Climbingholds

target10a Wood Pocket - 2-Finger 40mm

target10a

tawh2-FINGER40

€4.90

Wooden hold from target10a 2-Fingerpocket 40mm deep especially for climbing and bouldering training extremely skin-friendly design and surface! for 20° to 45° walls made of yellow poplar produced 100% in Germany (Franconia) suitable screws: M10 x 40mm and (optional anti-twist device) Spax 5 x 35mm Delivery Scope: 1 hold without Screw

Linebreaker BASE Trainingsboard - C-Ware

Linebreaker BOARDS

Linebreaker BASE Trainingsboard - C-Stock

target10a

talbBASECWARE

€89.90

Here the damage is greater than with the B-Stock: Either a handle is sanded or slightly damaged by a branch But it can also simply be a larger crack on the back wall or front side (the board still holds!) Or the entire surface is very rough and barrel-like! In the comments on the order, indicate which of the three restrictions you would like best!

Out-of-Stock

Trainingsboards

Antworks Strong Ant 2

Antworks

antw000120001

€109.00

The Strong Ant 2 is an entry-level Trainingsboard with large finger pads. The two included sticks can be inserted into four holes Pockets and finger holes on the front Expandable with ball handles and the Ant Enna pull up bar Material: ash Measurements: 80 x 15 x 5,6cm Weight: 3,9Kg Scope of delivery: 1x Strong Ant II, 2x sticks, fasteners and assembly...

View

Core Fingerboard

Metolius Simulator 3D Trainingsboard

So iLL Blister Board

Moon Fingerboard

HOLDZ Fingerboard 1

Antworks Power Ant Mini

Euroholds Basic Wood Board

So iLL Crimp Reaper

Kraxlboard classic

Metolius Rock Rings 3D - Trainingholds for Climbing Training

Metolius Wood Grips II Compact Trainingsboard

Lapis Rollyballs XL

Best sellers

Metolius Wood Grips Deluxe II Trainingsboard

Wooden Deep 2-Fingerpocket - Wood Climbing Hold

20 Crimps 0-45° - Climbing Holds (Hillocks)

WOODEN PHANTOM L1 - Two Symmetric Wood Climbing Holds XL Jugs

target10a Wood Pocket - 3-Finger 30mm

10 Jugs for 0-45° - climbing holds (Candies)

Antworks Lukis Darling - Rotating Pull Up Bar

15 Jugs for 0-45° - climbing holds (Worns)

Antworks BASE A (for Paralletes)

target10a Wood Pocket - 2-Finger 40mm

Linebreaker BASE Trainingsboard - C-Stock

Antworks Strong Ant 2

Home