Home

Showing 73-96 of 156 item(s)

Out-of-Stock

Literature for Climbing Training

Peak Performance

tmms000020001

Climbing Technique and Climbing Training from A - Z From Guido Köstermeyer 9. edition Language: german tmms-Verlag, 268 pages

View

Antworks Trägerplatten für Ant Bar und Stong Ant IV

Antworks Trägerplatten für Ant Bar und Stong Ant IV 2

Delivery Time: 1-2 Days

Trainingsboards

Antworks Carrier Plates for Ant Bar and Stong Ant IV

Antworks

antw000020001

€18.90

Carrier Plates for Strong Ant IV and Ant Bar.

Delivery Time: 1-2 Days

Trainingstools

target10a Roller Bar 65mm - Rotating Pull Up Bar for Climbing Training

tarb000010065

€49.90

Rotating pull-up bar made of beechwood with 65mm diameter. For heavy pull-ups or for funny bouldering problems. Diameter: 65mm Length Wood: 64cm Weight: 2Kg Material: Beech Wood without ball bearing

Out-of-Stock

Trainingsboards

Antworks Strong Ant 2

Antworks

antw000120001

€109.00

The Strong Ant 2 is an entry-level Trainingsboard with large finger pads. The two included sticks can be inserted into four holes Pockets and finger holes on the front Expandable with ball handles and the Ant Enna pull up bar Material: ash Measurements: 80 x 15 x 5,6cm Weight: 3,9Kg Scope of delivery: 1x Strong Ant II, 2x sticks, fasteners and assembly...

View

-€40.00

Delivery Time: 1-2 Days

Trainingsboards

Antworks Power Ant Mini

Antworks

antw000110001

€99.90 €139.90

The Power Ant Mini is a Trainingsboard / Pegboard combination for beginners. The two included sticks can be inserted into six holes Grip depth between 20, 30 and 40mm Ergonomic handles Expandable with ball handles and Ant Enna pull up bar Scope of delivery: 1x Strong Ant II, 2x sticks, fasteners and assembly instructions

Delivery Time: 1-2 Days

Screws / Nuts / Screw-Wrenches

1 Countersunk Screw M10 (30-100mm Length)

slsk0000010000

€0.42

Countersunk Screw M10 - 30mm to 200mm Length for mounting climbing holds with inner Hexagon Socket 8.8 galvanized zincked DIN EN ISO 10642 (former DIN 7991) one piece

Trainingsboards

Antworks Knockers

Antworks

antw000140000

€32.00

Ball handles for all Pegboards / Trainingboards with a drilling diameter of 41 - 42mm. Diameter in 80mm or 100mm Made from beech wood Knockers 80: 80 x 160mm; 0.9Kg Knockers 100: 100 x 180mm; 1.1Kg Scope of delivery: 1 pair of handles

Screws / Nuts / Screw-Wrenches

20 Countersunk Screws M10 (30-100mm Length)

slsk0000200000

€7.49

Countersunk Screws M10 - 30mm to 200mm Length for mounting climbing holds with inner Hexagon Socket 8.8 galvanized zincked DIN EN ISO 4762 (former DIN 912) 20 pieces

Antworks Lukis Darling - Rotierende Klimmzugstange

Antworks Lukis Darling - Rotierende Klimmzugstange 2

Trainingsboards

Antworks Lukis Darling - Rotating Pull Up Bar

Antworks

antw000090001

€109.00

High quality, self-rotating pull up bar by Antworks. For special training of the grip strength 60mm diameter Handmade from ash Dimensions: 94 x 9,0 x 6,0cm Weight: 2,5Kg

Delivery Time: 1-2 Days

Screws / Nuts / Screw-Wrenches

50 Countersunk Screws M10 (30-100mm Length)

slsk0000500000

€17.99

50 Countersunk Screws M10 - 30mm to 200mm Length for mounting climbing holds with inner Hexagon Socket 8.8 galvanized zincked DIN EN ISO 4762 (former DIN 912) 50 pieces

Portable Trainingsboards

Antworks Arapiles – Climbing Burger

Antworks

antw000130001

€299.00

The Arapiles Climbing Burger from Antworks is a completely new Trainingsboard design: Free-hanging volume with different sloper surfaces, finger ridges, finger holes, cracks and comfortable "jugs" Also suitable for crossfit training Made of cross-glued lime wood Measurements: 34 x 34 x 28cm Weight: 8.6 Kg Scope of supply: 1x Arapiles - Climbing Burger...

-€50.00

Kraxlboard

Kraxlboard classic with Stick In Slopers

Kraxl Board

kbhb000010002

€129.90 €179.90

The Kraxlboard "classic" is made out of beech wood. It offers all needed kinds of holds! With a pair of 150mm Slopers Material: Beech Wood Size: 580 x 230 x 40mm Weight: ca. 2,6kg

Delivery Time: 1-2 Days

Screws / Nuts / Screw-Wrenches

100 Countersunk Screws M10 (30-100mm Length)

slsk0001000000

€33.99

100 Countersunk Screws M10 - 30mm to 200mm Length for mounting climbing holds with inner Hexagon Socket 8.8 galvanized zincked DIN EN ISO 4762 (former DIN 912) 100 pieces

Delivery Time: 1-2 Days

ABC Spax

Spax Countersunk Screws 8mm Thickness, 100mm Length

slsx000-8x100

€0.69

Spax Countersunk Head Screws 8mm 100mm length SPAX Construction screws Countersunk head T-STAR plus Partial thread Galvanized, yellow chromated

Delivery Time: 1-2 Days

Weight Training

Antworks Parallettes

Antworks

antwPARALLETT

€109.00

Paralletes by Antworks. Two different heights! Can be used with the BASE A as a chin-up bar. Material: Side panels are birch multiplex Beech stick 2 heights: 70mm flat 230mm upright Dimensions: 450mm pole length 40mm bar diameter Weight: 5.5 Kg Delivery: 2 mini bars 4 stainless steel screws 1 screwdriver TX40

Delivery Time: 1-2 Days

ABC Spax

Spax Countersunk Screws 8mm Thickness, 120mm Length

slsx000-8x120

€0.85

Spax Countersunk Head Screws 8mm 120mm length SPAX Construction screws Countersunk head T-STAR plus Partial thread Galvanized, yellow chromated

Weight Training

Antworks BASE A (for Paralletes)

Antworks

antwBASEA0001

€69.00

With these special wall mounts, it is possible to use your Antworks Parallettes as a pull-up bar in a few simple steps, whether on a wall, roof pitch or ceiling. The hanging is the simplest. The Parallettes are simply pushed sideways into the holders and secured against slipping with the help of the two snapper. Finished.

Delivery Time: 1-2 Days

ABC Spax

Spax Countersunk Screws 8mm Thickness, 140mm Length

slsx000-8x140

€0.99

Spax Countersunk Head Screws 8mm 140mm length SPAX Construction screws Countersunk head T-STAR plus Partial thread Galvanized, yellow chromated

-€10.00

Delivery Time: 1-2 Days

Trainingstools

Linebreaker BOLT - Weight Loading Pin - 2,5cm

target10a

talbBOLT00250

€19.90 €29.90

The Linebreaker BOLT is a weight loading pin to load with conventional 30mm weight plates. A wide variety of handles can be attached with a carabiner to lift the freely adjustable weight. Dimensions: 36cm high and 2.5cm diameter Weight (with carabiner and nylon strap): 0,8 Kg Scope of delivery: 1 bolt with carabiner and nylon strap Without weight plates!

Delivery Time: 1-2 Days

Linebreaker BOARDS

Linebreaker BASE Trainingsboard - B-Stock

target10a

talbBASEBWARE

€109.90

B-Stock: Full functional, but small damages on surface such as cracks, scratches or repairs with wood kit. The damage is only visual - there are no restrictions on training!The Linebreaker BASE is the training board for beginners from. An ideal partner for getting started with climbing or bouldering training on the fingerboard.With app for Android and IOS!

Spax-Schrauben Torx verzinkt 5 x 45 Teilgewinde

Delivery Time: 1-2 Days

ABC Spax

Spax-Screws galvanized Torx 5 x 45 threaded portion

slsx000005x45

€0.07

Spax-Screws galvanized Torx 5 x 45 threaded portion for campus rungs Suitable for campus rungs or climbing holds

Linebreaker AIR - Portables Trainingsboard - B-Ware

Linebreaker AIR - Portables Trainingsboard - B-Ware 2

Delivery Time: 1-2 Days

Linebreaker BOARDS

Linebreaker AIR - Portable Trainingsboard - B-Stock

target10a

talbAIR0BWARE

€79.90

Linebreaker AIR by target10a The mobile, hang-anywhere entry-level hangboard Perfect for beginners and intermediates! Ideal if you can’t mount a fixed board: Simply hang it with a carabiner (not included) from a pull-up bar, tree branch, beam, balcony rail – and start training instantly Two hanging angles: Doubles the difficulty level of every grip –...

Spax-Schrauben Torx verzinkt 5 x 50 Teilgewinde

Delivery Time: 1-2 Days

ABC Spax

Spax-Screws galvanized Torx 5 x 50 threaded portion

slsx000005x50

€0.07

Spax-Screws galvanized Torx 5 x 50 threaded portion for campus rungs Suitable for campus rungs or climbing holds

Linebreaker PRO Trainingsboard - B-Ware 2

Delivery Time: 1-2 Days

Linebreaker BOARDS

Linebreaker PRO Trainingsboard - B-Stock

target10a

talbPRO0BWARE

€99.90

B-Stock: Full functional, but small damages on surface. The Linebreaker PRO is the top training board for extreme climbers! The hold selection and hold depths are intentionally designed heavy. All edges are perfectly rounded for a skin- and joint-gentle training. The step design of the board prevents the unloaded fingers from bumping or resting on the board.

Core Fingerboard

Metolius Simulator 3D Trainingsboard

So iLL Blister Board

Moon Fingerboard

HOLDZ Fingerboard 1

Antworks Power Ant Mini

Euroholds Basic Wood Board

So iLL Crimp Reaper

Kraxlboard classic

Metolius Rock Rings 3D - Trainingholds for Climbing Training

Metolius Wood Grips II Compact Trainingsboard

Lapis Rollyballs XL

Home

Peak Performance

Antworks Carrier Plates for Ant Bar and Stong Ant IV

target10a Roller Bar 65mm - Rotating Pull Up Bar for Climbing Training

Antworks Strong Ant 2

Antworks Power Ant Mini

1 Countersunk Screw M10 (30-100mm Length)

Antworks Knockers

20 Countersunk Screws M10 (30-100mm Length)

Antworks Lukis Darling - Rotating Pull Up Bar

50 Countersunk Screws M10 (30-100mm Length)

Antworks Arapiles – Climbing Burger

Kraxlboard classic with Stick In Slopers

100 Countersunk Screws M10 (30-100mm Length)

Spax Countersunk Screws 8mm Thickness, 100mm Length

Antworks Parallettes

Spax Countersunk Screws 8mm Thickness, 120mm Length

Antworks BASE A (for Paralletes)

Spax Countersunk Screws 8mm Thickness, 140mm Length

Linebreaker BOLT - Weight Loading Pin - 2,5cm

Linebreaker BASE Trainingsboard - B-Stock

Spax-Screws galvanized Torx 5 x 45 threaded portion

Linebreaker AIR - Portable Trainingsboard - B-Stock

Spax-Screws galvanized Torx 5 x 50 threaded portion

Linebreaker PRO Trainingsboard - B-Stock

Home